Innovative solutions for creating healthy, efficient, eco-friendly homes

Alternative Building Systems Loveland CO

The confusion between nominal, clear-wall, whole-wall and dynamic R-values illustrates the problem of comparing building wall systems. What is needed is an apples-to-apples testing program by an independent agency.

Associates in Building and Design, Ltd.
4803 Innovation Drive, Suite 1
Fort Collins, CO
Services
Commercial Contractor, Custom Builder, Designer / Architect, Remodeler
Membership Organizations
American Institute of Building Design, American Society of Interior Designers, American Society of Interior Designers (ASID), Colorado Chapter, Better Business Bureau, Home Builders Association of Northern Colorado, NAHB - Certified Aging In-Place Specialist, NAHB Certified Graduate Remodeler, National Association of Home Builders, U.S. Green Building Council

Data Provided by:
Philgreen Construction, Inc.
(970) 672-0089
Fort Collins, CO
Specialty
Site-Built Homes

Bluestone Homes of Colorado, LLC
(970) 472-9125
Fort Collins, CO
Specialty
Site-Built Homes

Sierra Enterprises, Inc.
(970) 282-1374
Fort Collins, CO
Specialty
Site-Built Homes

Dana McBride Homes, Inc.
(970) 222-7534
Fort Collins, CO
Specialty
Site-Built Homes

Baosol Sustainable Building Consulting
9702172885
13465 Woodchuck Dr.
Masonville, CO

Data Provided by:
Stonefield Homes, LLC
(970) 443-2056
Fort Collins, CO
Specialty
Site-Built Homes

Habitat for Humanity - Estes Park
(970) 586-8301
Fort Collins, CO
Specialty
Affordable, Site-Built Homes

Habitat for Humanity - Fort Collins
(970) 488-2602
Fort Collins, CO
Specialty
Affordable, Site-Built Homes

Pinecrest Custom Homes, LLC
(970) 226-1655
Fort Collins, CO
Specialty
Site-Built Homes

Data Provided by:

Alternative Building Systems

Provided By:

How do various alternative building systems compare in price and performance?

Question: How do Rasta block (a concrete form system), aerated autoclaved concrete (AAC) and Durisol (blocks made from recycled wood) compare in price and performance? Performance criteria can include insulating value, structural strength, resistance to termite burrowing, resistance to water, vapor permeability/breathability and anything else you can think of that matters. I'm also interested in comparison of those materials with the Strata International Group's insulated composite described in your May/June 2006 edition, though that product may be too new for good price data. Thanks for any advice you can offer.

David Drooz

Raleigh, N.C.

Answer: The confusion between nominal, clear-wall, whole-wall and dynamic R-values illustrates the problem of comparing building wall systems. What is needed is an apples-to-apples testing program by an independent agency. The closest approximation to date is that of the Oak Ridge National Laboratory's (ORNL) Building Envelopes Program.

ORNL has tested the whole-wall R-values of a number of wall systems, including conventional wood frame, steel frame, log, adobe and earth blocks, structural insulated panels (SIPs) and insulated concrete forms (ICFs). To view the results, log on to http://www.ornl.gov/sci/roofs+walls and click on Hotbox Test R-value Database. However, with dozens of ICF products on the market, ORNL will never be able to test them all.

The next best source I know of is Supplement D-1 of the Washington State Energy Code (download at http://www.energy.wsu.edu/ftp-ep/pubs/code/bfg/2004/SupplementD_2004.pdf ), which lists the whole-wall R-values of 19 different ICFs.

Unfortunately, the extremely complex nature of heat flow through walls and roofs, which depends not only on the insulating property of the insulation fill but also on the air-leakiness, the presence of heat short-circuits such as framing and rebar, the amount and location of mass, and the local climate, allows for dubious claims by zealous proponents of any system. My advice is to take any and all claims by manufacturers with a heavy dose of skepticism and rely instead on the experiences of as many customers of the product as possible.

Any system approved by your local building inspector will prove structurally adequate. Any product containing wood fiber may be a target for termites, however. You can ensure an adequate interior vapor barrier (necessary in heating climates) simply by priming the interior surfaces with vapor barrier paint (any paint with a perm rating of 1.0 or less).

Cost comparisons are meaningful only when they include labor. Ask manufacturers for the names of contractors experienced in the use of their products. And, as always, get at least three estimates with stipulations on maximum allowed cost overrun.

Click here to read article from Smart-Homeowner.com